24小时咨询热线:

18926897795许经理 0769-22314537

news center 消息资讯
contact us 沟通我们

陆地公司:河南省东莞市南城大街西平工区彭眼村西南路18号(钦胜科技园内)

TEL/FAX:886-769-22314537

Q Q:641563647 SKype:Jeffreychen66

中文邮箱:twjoji88@126.com

英文邮箱:Jeffreychen66@hotmail.com

江西商厦:江西彰化县鹿港镇头仑里捕尾巷2

电话机:00886-47615693

艺术林先生:0960-617741

作业陈经理:0911-037376

脚下位置: 首页 > 产品展示 > 热熔胶机

针线活热熔胶封盒机

产品信息
产品种类: 热熔胶机
关键词: 热熔胶封盒机
点击率:
通告时间: 2018-11-09 20:50:39
全国劳动热线: 0769-22314537
产品详情

热熔胶封盒机利用说明

 

资本机器集电气一体自动化控制生产、燃气元件采用优质产品性能稳定、生产速度40-501分钟,封盒规格(长×宽敞×高)(100-290)×(70-150)×(45-120mm,装机功率0.5-0.89KW220V50HZ),源0.4mpa,0.3M3/min

 

1. 做事原理:名将盒子向里推,顶盒子碰到行程开关1时,上胶气缸自动上升,名将胶水沾在盒子两端。上胶气缸设有磁感应开关,顶气缸上升至磁感应开关感应范围气缸会自动下落。同时顶盒气缸上升,名将盒子折叠成形。当盒磁感应开关感应时气缸会自动下落。顶气缸自动下落后,老二个礼花方可向里推。顶盒子碰到行程开关2时,出盒气缸开始工作,名将盒子推向分流槽,顶气缸上升至磁感应开关感应范围气缸会自动下落。


2.简言之故障检查 simple failure checking

故障现象 failure symptom

检查内容 check content

 

机械不办事machine is out of work

1. 能源插头是否插入   the power plug whether insert

2. 能源开关是否打开  the power switch whether turn on

3. 气压是否健康     the air pressure whether normal

4. 检查行程开关1是不是工作 check the travel switch 1 whether work

上胶后顶盒气缸不办事 after gluing the jacking box air cylinder doesnt work

1. 检查上胶磁感应开关是否工作 check the gluing magnetic induction switch whether work

2. 检查顶盒电磁阀是否工作      check the jacking box electric magnetic valve whether work  

当盒气缸上升后不下降 jacking box air cylinder doesnt fall after rise

检查顶盒磁感应开关是否工作  check the jacking box magnetic induction switch whether work

出盒气缸不办事 eject box air cylinder doesnt work

检查行程开关2是不是工作    check the travel switch 2 whether work

出盒气缸不下降 eject box air cylinder doesnt fall

检查出盒磁感应开关是否工作 check the eject box magnetic induction switch whether work

 

胶箱温度失控 temperature of glue box is out of control

1. 检查电热隅 check the thermo couple

2. 检查加热棒 check the heat stick

3. 如以上两线均无问题,详见温控表利用说明书 if the above two points all without problem, please see the operate manual detail of  the temperature controller meter 

上胶气缸12未同步 gluing air cylinder 1 and 2 doesnt  synchronize

调整气缸两端节流阀 adjust the both ends throttle valve of air cylinder 


运用案例范围:

生产以热熔胶大规模用于家热熔胶喷胶涂胶、电子产品组装、不干纸盒胶贴包装行业:纸箱包装、饮料包装,涂布复合行业: 等相关行业现代化设施

Box sealing machine instructions 

This machine combine electricity into one, automatic control production, electric component adopt the high quality products, steady performance ,production speed :40-50 boxes /one minute, sealing standard(L×W×H) 100-290)×(70-150)×(45-120mminstall power 0.5-0.89KW220V50HZ),air source 0.4mpa,0.3M3/minWorking principle : push the box inward, when the box touch the travel switch one ,gluing air cylinder will rise automatically to stick the glue on the both ends of box, gluing air cylinder with the magnetic induction switch ,when the air cylinder rise to the induction switch range ,air cylinder will fall automatically, meanwhile jacking box air cylinder rise ,fold the box into shape. When jacking box magnetic induction switch react, the air cylinder will fall automatically, after the air cylinder fall, the second box will be pushed inward. When the box touch the travel switch two, the eject box air cylinder starts to work , push the boxes to the distributary tank, when air cylinder rise to the induction range of magnetic induction switch, which will fall automatically.



上一篇:MODEL-FS2008长机

副一篇:热熔胶注胶合膜机

本文Tags标签: 热熔胶封盒机
购买: 针线活热熔胶封盒机
  • *联系人:
  • *手机:
  • 合作社名称:
  • 邮箱:
  • *购买意向:
  • *验证码:
  • 血站首页  |   热熔胶机  |     |   产品展示  |   运用案例  |   消息资讯  |   关于我们  |   沟通我们

      <b id="71fbc6e8"></b>
        <legend id="35ed921a"></legend>